Belt Sling with Metal Fittings G25-4P20-1.72 TRUSCO

【Features】
Uses a belt sling, making it lightweight and improving work efficiency.
Since the working load of the entire hanging device is set, it can be selected according to the weight of the suspended load.
Uses an oval link, making it easy to hook onto a crane hook.

【Use】
For sling work and transportation at construction, civil engineering sites, and various factories.
For transporting molds, eye bolt attachments, etc.

【Specification】
Basic working load (t): Hanging angle 60° 1.72
Belt dimensions (mm) Width x Thickness: 25 x 8
Reach (m): 2
Hook color: Orange
Eye part width (mm): 30
Eye part length (mm): 85
Eye part thickness (mm): 13
Sewing part length (mm): 200
Weight hook dimension (mm)E: 26
Weight hook dimension (mm)E': 20
Maximum working load (t): 2
Weight hook dimensions (mm) D: 10
Weight hook dimensions (mm) C: 22
Weight hook dimensions (mm) A: 93
Alloy main link dimensions (mm) D: 17
Alloy main link dimensions (mm) C: 13
Alloy main link dimensions (mm)B: 65
Alloy main link dimensions (mm)A: 125
Weight hook dimensions (mm)I: 22
Operating temperature (℃): 100 degrees or less
Weight hook dimension (mm) H: 16
Weight hook dimension (mm) G: 37
Weight hook dimension (mm) A': 125
Weight hook dimension (mm) F: 34
Color: Orange

【Specification2】
The belt sling uses the same belt as the G series.
4 hanging belt sling type
Upper: Alloy main link 2ton
Lower: weight hook (with spring) 0.5ton

【Material/Finish】
Belt sling: Nylon (internal polyester)
Link: Special alloy steel
Hook: Special alloy steel

【Set contents/accessories】- Belt sling x 4, hook (with retainer) x 4, alloy main link x 1 (already assembled)

【caution】
Please be sure to use the product under the working load for each hanging angle.
The working load is the working load when hanging evenly at 4 points. Please reduce the working load to 3/4 for 3-point suspension, 2/4 for 2-point suspension, and 1/4 for 1-point suspension.
Please check the dimensions of the hook and ring to ensure that they can be attached to the object.
Be sure to use corner pads or other pads on sharp corners of the load or areas where there is a risk of damaging textile slings such as belt slings due to friction.
Not for chemical resistance.