Rechargeable Disk Grinder G3610DD(NN) HiKOKI
【order ID】5386582
【basic item number】G3610DDNN 6444
【brand name】HiKOKI
【minimum order quantity】1
【packages】1
【manufacturer name】Koki-holdings Co., Ltd.
【Country of origin】
【Weight】1.7KG
【Features】
Employs a paddle-type switch (ON when squeezed/OFF when released) for increased safety.
Maximum output is approximately 20% higher than the conventional product (G3610DB) and can handle powerful grinding work.
After rotation stops during high-load work, rotation will automatically resume if the load condition is improved within 1.5 seconds.
Small head, lightweight and compact body, improved to reduce fatigue even during long hours of work.
Equipped with a continuously variable speed dial and auto mode function, allowing you to adjust the rotation speed according to the application.
Since the side handle can be attached in three directions, the range of work has been expanded.
Easy-to-maintain dust-proof filter improves dust-proof performance.
Equipped with high-brightness LED lights on both sides of the head for improved visibility.
【Use】
For deburring and finishing iron, bronze, aluminum castings, etc., grinding welded and fused parts, and removing rust
For polishing the base of painted surfaces, removing rust, and removing paint
For mild steel materials, tiles, stones, concrete, etc. For cutting, grooving and grinding
【Specification】
No-load rotation speed (min [[-1st power]]): 5500 in auto mode/3200 to 10000 in variable speed mode
Grinding wheel diameter (mm): 100
Battery voltage (V): 36
Battery type: Multi-volt Storage battery
Grinding wheel dimensions (Φmm) Outer diameter: 100
Grinding wheel dimensions (Φmm) Hole diameter: 15
Total length (mm): 363
Height (mm): 60
Power supply (V): DC36
Charging time (minutes): 25 (for BSL36A18X charging)
【Specification2】
Paddle type switch
With speed dial
With brake
Kickback reduction system
Restart prevention function
Soft start
With rotation return control function
Whetstone mounting shaft dimensions (diameter (thread pitch) x length): 10 (1.5) ×11mm
Working amount per charge (estimate): Concrete reinforcing approx. 7.6m (Material: Concrete, cutting depth 20mm), Rebar cutting approx. 152 pieces (Material: Φ10mm reinforcing bar)
DC brushless motor
【Material/Finish】
Body: Resin
【Set contents/accessories】
100mm resinoid flexible toy
Vibration-proof side handle
Tool-less foil guard
Foil nut
Spanner
Foil washer (for diamond)
【caution】
Battery pack, charger, and case are sold separately.
Employs a paddle-type switch (ON when squeezed/OFF when released) for increased safety.
Maximum output is approximately 20% higher than the conventional product (G3610DB) and can handle powerful grinding work.
After rotation stops during high-load work, rotation will automatically resume if the load condition is improved within 1.5 seconds.
Small head, lightweight and compact body, improved to reduce fatigue even during long hours of work.
Equipped with a continuously variable speed dial and auto mode function, allowing you to adjust the rotation speed according to the application.
Since the side handle can be attached in three directions, the range of work has been expanded.
Easy-to-maintain dust-proof filter improves dust-proof performance.
Equipped with high-brightness LED lights on both sides of the head for improved visibility.
【Use】
For deburring and finishing iron, bronze, aluminum castings, etc., grinding welded and fused parts, and removing rust
For polishing the base of painted surfaces, removing rust, and removing paint
For mild steel materials, tiles, stones, concrete, etc. For cutting, grooving and grinding
【Specification】
No-load rotation speed (min [[-1st power]]): 5500 in auto mode/3200 to 10000 in variable speed mode
Grinding wheel diameter (mm): 100
Battery voltage (V): 36
Battery type: Multi-volt Storage battery
Grinding wheel dimensions (Φmm) Outer diameter: 100
Grinding wheel dimensions (Φmm) Hole diameter: 15
Total length (mm): 363
Height (mm): 60
Power supply (V): DC36
Charging time (minutes): 25 (for BSL36A18X charging)
【Specification2】
Paddle type switch
With speed dial
With brake
Kickback reduction system
Restart prevention function
Soft start
With rotation return control function
Whetstone mounting shaft dimensions (diameter (thread pitch) x length): 10 (1.5) ×11mm
Working amount per charge (estimate): Concrete reinforcing approx. 7.6m (Material: Concrete, cutting depth 20mm), Rebar cutting approx. 152 pieces (Material: Φ10mm reinforcing bar)
DC brushless motor
【Material/Finish】
Body: Resin
【Set contents/accessories】
100mm resinoid flexible toy
Vibration-proof side handle
Tool-less foil guard
Foil nut
Spanner
Foil washer (for diamond)
【caution】
Battery pack, charger, and case are sold separately.
- Regular price
- ¥28,615
- Sale price
- ¥28,615
- Regular price
-
- Unit price
- /per
Sale
Sold out
お気に入り機能をご利用いただくにはログインが必要です。
閉じる
Adding product to your cart
Use left/right arrows to navigate the slideshow or swipe left/right if using a mobile device
KITAL is an e-commerce site exclusively for reseller.
Are you a reseller?
If not, please contact through our contact page with your company name. We will contact you.
yes
no