Rechargeable Drill Drivers 06019J5151 BOSCH

【Features】
BITURBO (double) turbo series with power and speed exceeding cord type.
Equipped with an angle sensor to support accurate work.
You can select 45°, 60°, or an angle set via the app on the main unit's control panel.
When the set angle (±3°) is reached, the lamp on the top of the main unit lights up in green to notify you.
Function settings can be configured by connecting to a smartphone.
Equipped with kickback prevention function.
Efficiency is increased with a new high-control clutch that stops instantly.
EMP protects the motor from overload.

【Use】
Drilling in concrete, stone, etc.
Drilling in wood, metal, etc.
Tightening/loosening screws

【Specification】
No-load rotation speed (min [[-1 power]]) High speed: 0 to 2200
No-load rotation speed (min [[-1 power]]) Low speed: 0 to 550
Maximum tightening torque (N・m): 150
Number of blows (min [[-1st power]]): 0 to 3300
Body dimensions (mm): 207 x 275 x 73
Battery voltage (V): 18
Battery capacity (Ah): 8
Charging time (minutes): Approx. 68 (empty → 80% turbo charge), approx. 79 (empty → full charge)

【Specification2】
Capacity: Concrete 20mmΦ, Ironwork 16mmΦ, Woodworking 150mmΦ, Screw tightening 12mmΦ, Ironwork hole saw 53mmΦ, ALC/Siding core 220mmΦ
Rated voltage: DC18V
Battery capacity: 8Ah
Rigid body tightening torque: (drill position) 150N・m
Elastic body tightening torque: (drill position) 84N・m
Chuck grasping range: 1.5-13mmΦ
Charging time: Approximately 68 minutes (empty → 80% turbo charge), approximately 79 minutes (empty → full charge)
Body dimensions: 207×275×73mm

【Material/Finish】
Polyamide resin (PA)

【Set contents/accessories】
Body
8.0Ah battery (ProCORE18V8.0) x 2
Charger (GAL1880CV)
Side handle
Depth gauge
Body
Side handle
Depth gauge
Charger (GAL1880CV)
8.0Ah battery (ProCORE18V8.0 ) 2 pieces
Carrying case (L-BOXX136N)
Connectivity chip (GCY42)

【caution】
－