Grip Anchor GA-D type(Hot Dip Galvanizing) GA-20MD SANKO

【Features】
Since the construction surface is flat, the anchor will not get in the way even after removing the equipment.
Uses can be expanded by selecting bolts depending on specifications.

【Use】
For concrete
Piping hanging fittings installation, light sky construction, air conditioning duct installation, cable rack hanging, scaffolding installation, etc.

【Specification】
Screw designation: M20
Outer diameter (mm): 25.4
Overall length (mm): 80
Screw length (mm): 30
Drill diameter (mm): 26.0
Maximum tensile load (kN): 52.9
Embedded Depth (mm): 80
Drilling depth (mm): 90

【Specification2】
Boxed

【Material/Finish】
Steel
Surface treatment: Hot-dip galvanizing (dob)

【Set contents/accessories】
－

【caution】
Maximum tensile load is the value when concrete strength Fc=21N/[[MM2]].
A special holder is required for construction.
Be sure to remove chips from the pilot hole.
Please check whether the cone is attached to the main body and set it in the pilot hole.