AC/DC CLAMP METER CM4371-50 HIOKI

【Features】
Equipped with high safety + high-performance DMM, AC/DC clamp meter 600A
Automatically distinguishes between AC/DC
For checking open circuit voltage of solar panels
Simultaneous display of effective value and waveform peak of inrush current (INRUSH)
Dust-proof and waterproof Performance: IP54

【Use】
Electrical work, electrical equipment maintenance and inspection

【Specification】
DC current (A): 600
AC current (A): 600
DC voltage (V): 1000
AC voltage (V): 1000
Resistance (Ω): 6M
Product name: AC/DC clamp meter CM4371-50

【Specification2】
[DC current range] 20.00A/600.0A, basic accuracy: ±1.3%rdg.±0.08A (20A range) [AC current range] 20.00A/600.0A (10 to 1kHz, true RMS rectification), basic Accuracy 45-66Hz: ±1.3%rdg.±0.08A (at20A) [Crest factor] 20.00A range: 7.5, 600.0A range: 3 or less [AC + DC current range] 20.00A/600.0A (10 - 1kHz, true (effective value rectification), basic accuracy DC, 45-66Hz: ±1.3%rdg.±0.13A (at20A)
[DC voltage range] 600.0mV to 1000V [AC voltage range] 6.000V to 1000V, 4 ranges (15 to 1kHz, true RMS rectification), basic accuracy 45-66Hz: ±0.9%rdg.±0.003V (at6V) [AC + DC voltage range] 6.000V to 1000V, 4 ranges, basic accuracy DC, 45-66Hz: ± 1.0%rdg.±0.013V(at6V)
[Resistance range] 600.0Ω to 6.000MΩ, 5 ranges, basic accuracy: ±0.7%rdg.±0.5Ω(at600Ω)
[Capacitance range] 1.000μF to 1000μF, 4 ranges, basic accuracy: ±1.9%rdg.±0.005μF(at1μF)
[Frequency range]9.999Hz to 999.9Hz, 3 ranges, basic accuracy: ±0.1%rdg.±0.003Hz(at9.999Hz)
[Temperature] (K)] -40.0 to 400.0°C, accuracy: ±0.5% rdg.±3.0°C + temperature probe accuracy addition [Voltage detection] Hi: AC40V to 600V, Lo: AC80V to 600V, 50/60Hz
[Other functions] DC Power, continuity check, diode check, AC/DC automatic discrimination, positive/negative determination of DC current/voltage, maximum/minimum/average/maximum peak value/minimum peak value display, low-pass filter, display value hold, backlight, auto Power save, buzzer sound, zero adjustment, etc.
[Dustproof and waterproof] IP54 (during storage or current measurement of insulated conductors)
[Power supply] AAA alkaline batteries (LR03) x 2, approximately 40 hours (Z3210 not installed)
[Measurable conductor diameter] Φ33mm

【Material/Finish】
－

【Set contents/accessories】
Test lead L9300 x 1
Carrying case C0203 x 1
AAA alkaline battery (LR03) x 2
Instruction manual x 2
Precautions for use x 1

【caution】
－