AC/DC CLAMP METER/WIRELESS ADAPTER CM4373-90 HIOKI

【Features】
Equipped with high safety + high-performance DMM, AC/DC clamp meter 2000A
Automatically distinguishes between AC/DC
For checking open circuit voltage of solar panels
Simultaneous display of effective value and waveform peak of inrush current (INRUSH)
Wireless Compatible with Transfer measured values ​​to a smartphone or tablet (when wireless adapter Z3210 is installed)
Directly transfer and input measurement data wirelessly into an Excel form (when wireless adapter Z3210 is installed)
Harmonic analysis from 1st to 30th orders is possible with GENNECT Cross (When wireless adapter Z3210 is installed)
Transfer measured values ​​to smartphone or tablet (when wireless adapter Z3210 is installed)

【Use】
Electrical work, electrical equipment maintenance and inspection

【Specification】
DC current (A): 2000
AC current (A): 2000
DC voltage (V): 1000
AC voltage (V): 1000
Resistance (Ω): 6M
Product name: AC/DC clamp meter wireless set CM4373- 90

【Specification2】
[DC current range] 600.0A/2000A, basic accuracy: ±1.3%rdg.±0.3A (600A range) [AC current range] 600.0A/2000A (10 to 1kHz, true RMS rectification), basic accuracy 45 -66Hz: ±1.3%rdg.±0.3A (at600A) [Crest factor] 600.0A range: 7.5, 2000A range: 2.84 or less [AC + DC current range] 600.0A/2000A (10 to 1kHz, true RMS rectification) ), basic accuracy DC, 45-66Hz: ±1.3%rdg.±0.13A (at600A) RMS rectification), basic accuracy 45-66Hz: ±0.9%rdg.±0.003V (at6V) [AC + DC voltage range] 6.000V to 1000V, 4 ranges, basic accuracy DC, 45-66Hz: ±1.0%rdg. ±0.013V(at6V)
[Resistance range] 600.0Ω to 6.000MΩ, 5 ranges, basic accuracy: ±0.7%rdg.±0.5Ω(at600Ω)
[Capacitance range] 1.000μF to 1000μF, 4 ranges, basic Accuracy: ±1.9%rdg.±0.005μF(at1μF)
[Frequency range]9.999Hz to 999.9Hz, 3 ranges, basic accuracy: ±0.1%rdg.±0.003Hz(at9.999Hz)
[Temperature (K)] -40.0 to 400.0℃, accuracy: ±0.5% rdg.±3.0℃ + temperature probe accuracy addition [Voltage detection] Hi: AC40V to 600V, Lo: AC80V to 600V, 50/60Hz
[Other functions] DC power, continuity check , diode check, AC/DC automatic discrimination, positive/negative determination of DC current/voltage, maximum/minimum/average/maximum peak value/minimum peak value display, low-pass filter, display value hold, backlight, auto power save, buzzer Sound, zero adjustment, etc.
[Dustproof and waterproof] IP54 (during storage or current measurement of insulated conductors)
[Power supply] AAA alkaline batteries (LR03) x 2, approximately 40 hours (Z3210 not installed)
[Measurable conductors] Diameter】Φ55mm

【Material/Finish】
－

【Set contents/accessories】
Test lead L9300 x 1
Carrying case C0203 x 1
AAA alkaline battery (LR03) x 2
Instruction manual x 2
Precautions for use x 1
Wireless adapter Z3210

【caution】
－