Analog Multitester EM7000 SANWA

【Features】
Highly sensitive FET electronic tester equipped with a DC current 0.12μA range.
A wide range of measurements from 0.2 to 200MΩ is possible.
It is a CE standard product.
Can measure square wave pulse P-P value.
DCV/DCA is compatible with zero center meter.
Frequency characteristics of sine wave AC 40Hz to 1MHz (AC low voltage)
Low frequency output: -10 to 51dB

【Use】
For electrical work.
For equipment maintenance.
For home appliance repair.

【Specification】
DC voltage (V): 1000
AC voltage (V): 750
DC current (A): 6
AC current (A): 6
Resistance (Ω): 200M
Calibration documents: Available
Power supply (V) : AA batteries (R6) x 2 / laminated 9V (6F22) x 1 (monitor battery included) Width (mm): 106 Depth (mm): 46 Height (mm): 165 Power source: Single 3 Dry batteries (R6) x 2 / Laminated 9V (6F22) x 1 (monitor battery included)

【Specification2】
Body dimensions (mm): 165 x 106 x 46
DCV/DCA uses zero center meter
1 spare fuse (F1176) included
Fuse specifications 1: Φ5×20mm 0.5A/250V 1.5kA Ceramic tube (F1176) )
Fuse specifications 2: Φ5×20mm 6.3A/250V 1.5kA ceramic tube (F1177)

【Material/Finish】
－

【Set contents/accessories】
Instruction manual
Test lead TL-21a
Spare fuse (F1176) x 1

【caution】
Do not use on power lines exceeding 6 kVA.
Do not input signals exceeding the maximum rated input value.
Do not use if the main body or test leads are damaged.
Do not hold the test lead closer to the test pin side than the brim during measurement.
Do not switch to other functions or ranges or change the plug during measurement.