BLUE CERAC BCR100-36 NRS

【Features】
Triangular ceramic abrasive grains with sharp edges and high grinding power.
Offset shape has a large contact surface, increasing work efficiency.
Economical with disk replacement.
A grinding disc with excellent cost performance.
Can be used with either electric grinder or pneumatic grinder.
Aluminum moisture-proof packaging.

【Use】
For surface grinding, deburring, chamfering, burn removal, light grinding, black scale removal, paint removal, etc. on general steel, stainless steel, aluminum, etc.

【Specification】
Particle size (#): 36
Outer diameter (mm): 100
Hole diameter (mm): 15
Maximum operating speed (rpm): 15000

【Specification2】
Tool used: Disc grinder
Maximum circumferential speed: 80m/s (4800m/min)

【Material/Finish】
－

【Set contents/accessories】
Separate 100MM pad for blue shellac offset type 15 holes 1 piece

【caution】
If you use the product with the pads removed, there is a risk of neck removal and deformation and wear.
Please be sure to use the special pad.
As a general rule, use at an angle of 15° or less.
Do not perform any work where the side of the product (outer periphery/edge surface) may come into contact with a corner or bead protrusion.
For workpieces with irregularities, please use it in the direction of holding it from directly above and pulling it toward you.