Residual Chlorine Measuring Instrument for Medium Concentration 080540-523 SIBATA

【Features】
By using DPD reagent or potassium iodide reagent, residual chlorine concentration (free residual chlorine, combined residual chlorine, total residual chlorine) can be measured from 2.0 to 10 mg/L.
If you own the main body of the "Residual Chlorine Meter DPD Method", you can purchase only the medium concentration colorimetric plate and replace it to use it in the same way.
The reagents used (DPD reagent, potassium iodide reagent) are the same as those for "Residual chlorine meter DPD method."
In order to prevent the growth of Legionella bacteria, which causes Legionnaires' disease, which is classified as a Type 4 infectious disease, it is necessary to regularly manage the hygiene of facilities and equipment.
Helpful for controlling residual chlorine concentration used for disinfection.

【Use】
For controlling the concentration of bound chlorine monochloramine (approximately 3 mg/L) used for disinfecting bath water
For controlling the concentration of chlorine disinfectant (5 to 10 mg/L) in the piping of circulating bathtubs
Chemical cleaning of cooling towers For concentration control of chlorine agents (5 to 10 mg/L) used in

【Specification】
Width (mm): 67
Depth (mm): 37
Height (mm): 156
Measurement range (mg/L): 2.0 to 10
Tested water amount (ml): Approximately 50Measurement method DPD method, measurement range 2.0 to 10mg/L 6 levels, standard colorimetric plate 2.0 3.0 4.0 5.0 7.0 10, DPD powder reagent not included, Dimensions: 67 (W) x 37 (D) x 156 (H) mm, Vinyl case: 97 (W) x 50 (D) x 170 (H) mm, weight 0.3 kg (including case)

【Specification2】
This measuring device is a simple measuring method similar to the "Residual Chlorine Meter DPD Method" based on the reaction between the residual chlorine contained in the sample water and the DPD reagent, resulting in a light reddish-purple color.
By using a special colorimetric plate for medium concentrations, concentrations from 2.0 to 10 mg/L can be measured in 6 levels.
By measuring free residual chlorine using DPD reagent and then adding potassium iodide reagent, total residual chlorine can be measured.
The combined residual chlorine concentration of monochloramine, etc. can be calculated from the difference between the total residual chlorine concentration and free residual chlorine.

【Material/Finish】
－

【Set contents/accessories】
Residual chlorine measuring device (with colorimeter plate for medium concentration) x 1
Square test tube with silicone cap x 3
Vinyl case x 1

【caution】
－