Ensat 309-M10XP1.5-2.3DNS TRUSCO

【Features】
Enzato [[R lower]] is an insert nut with good workability that can be used for resin, wood, etc. where internal threads are easily damaged by direct tapping.
Has a groove-shaped cutting edge that cuts the mating material with its own blade, so there is no need for pre-tapping.
Enzato [[R lower]] supports the force applied to the inner thread with the slightly larger outer thread, so it can withstand higher forces than a direct tap.
Reinforcement using Enzat [[R lower]] is limited by the inherent shear strength of the mating material or the mechanical strength of the bolts used.

【Use】
For reinforcing screws, preventing damage, and tightening male screws.

【Specification】
Applicable bolt screw: M10
Prepared hole diameter (mm): Soft wood 12.4, resin/hard wood 12.6-12.8
Dimensions (mm) L: 23
Dimensions (mm) D2: 16
Inner thread pitch (mm): 1.50
Length (mm): 23
External thread (mm): 16

【Specification2】
Super coarse external thread type

【Material/Finish】
Brass C3603

【Set contents/accessories】
－

【caution】
ENZART [[R lower]] is a registered trademark of KKV Corporation.