Air Plasma Cutter APC-15S SUZUKID

【Features】
This is an uncompromising, authentic air plasma exclusively for 100V, selected by professionals who have achieved the maximum "kiri/nuki" at 100V.
Equipped with a PFC (power factor correction) function that effectively copes with voltage drops.
Pilot arc allows smooth arc start.
Compact and lightweight design weighing only 8.3kg.
Can also cut iron, stainless steel, aluminum, brass, and copper.

【Use】
For cutting various metals.

【Specification】
Voltage (V): Single phase 100
Rated input (kVA): 2.3
Output current range (A): 7 to 15
Usage rate (%): 40
Cutting capacity (mm) Iron: 4
Cutting capacity (mm) ) Stainless steel: 3
Cutting capacity (mm) Aluminum: 2
Output adjustment range (A): 7 to 15
Width (mm): 151
Depth (mm): 471
Height (mm): 251
Power cord length Size (m): 3
Cutting capacity (mm): Mild steel 0.1~4.0 Stainless steel 0.1~3.0 Aluminum 0.1~2.0
Applicable cutting tip: P-778
Applicable shield cup: P-789
Tip hole diameter (mm): 0.6

【Specification2】
Rated input power: AC100V
Compressor sold separately
Required air pressure: 0.35 to 0.45MPa
Good cutting plate thickness (mild steel): 4 mm
With PFC (power factor correction) function
Start method: Pilot arc

【Material/Finish】
－

【Set contents/accessories】
Primary side power supply 3m
Torch cable 4m
Cable with ground 3m
1 electrode, 1 chip

【caution】
－