Flex-Hone BC type 811025006 YUKO

【Features】
It has a structure in which beads made of sintered artificial abrasive grains are attached to the fiber resin feet protruding from the shaft.
The legs are made of nylon resin and have high elasticity, making it possible to polish the inner surface of the workpiece with burrs and uneven surfaces.

【Use】
Deburring, polishing, and finishing the inner surface of the cylindrical parts of various manufactured equipment and parts.
Inner surface cleaning and rust removal of tubes and piping
Inner surface cleaning and finishing of various hydraulic and pneumatic cylinders, including internal combustion engines.
Chamfering of key grooves, rounding of edges, adjustment of fit, etc.

【Specification】
Applicable inner diameter (mm): φ24.0 to 27.0
Total length (mm): 203
Abrasive grain length (mm): 76
Shaft diameter (mm): φ5.6

【Specification2】
Tools used: electric drill, air drill, drilling machine, machining, etc.
The rotation speed varies depending on the workpiece, but is used between approximately 300 and 1200rpm
The working time varies depending on the material of the workpiece and the purpose of use, but as a guide, 10 to 20 seconds, Used in reciprocating motion
Wet use: Use water-soluble grinding fluid (solve type) or honing oil as the grinding fluid.

【Material/Finish】
Abrasive: Aluminum oxide
Shaft: Galvanized wire
Brush part: Nylon

【Set contents/accessories】
－

【caution】
Fare is 1200 yen. Hokkaido and Kyushu are 1,400 yen, Okinawa and remote islands are 1,700 yen.
*Standards are available from 216mm to 914mm. We also accept requests for non-standard products, so please contact us.