Fall Prevented Socket for Electric Impact Driver 67633 BESTTOOL

【Features】
This is a 18V compatible electric/charging impact driver socket with a mechanism that prevents the socket from falling even if the bit breaks.
If a load is applied to the bit due to overtorque, it will always break inside the socket, so it will not fall (PAT.).
You can work safely at heights as there is no need to worry about the socket falling.
Since the bit always breaks inside the socket, the broken bit does not get stuck in the impact body and is easy to attach, remove, and replace.
Since the inner diameter is 12 squares, it is easy to enter the nut quickly and work efficiency is very high.

【Use】
For tightening and loosening bolts and nuts using an electric screwdriver when working at heights.

【Specification】
Size across flats (mm): 21
Overall length (mm): 105
Size across flats (mm): 21
Shaft dimension (mm): 6.35
Type: Dodecagonal diameter

【Specification2】
18V impact compatible

【Material/Finish】
CR-V
Hexagonal shaft: NKD-1 (special quenching hardness HRC59.5~60℃)

【Set contents/accessories】
－

【caution】
Please use an electric drill with a clutch or an impact driver.
Make sure to install and replace socket bits correctly.
Do not use the tool for any purpose other than its intended use.
Please insert firmly into bolts and nuts before using as there is a risk of damage.