All Anchor C-D type(Hot Dip Galvanizing ) C-1612DS SANKO

【Features】
Easy installation by simply driving in the core rod.
Construction completion can be seen at a glance and construction management can be performed.
Can be installed directly on top of the attachment.
The body diameter and thread designation are the same type.

【Use】
For concrete
Installing handrails, fixing fence posts, etc.

【Specification】
Thread designation: M16
Overall length (mm): 120
Thread length (mm): 40
Maximum attachment thickness (mm): 40
Prepared hole diameter (mm): 17.0
Maximum tensile load (kN): 29.9
Embedding depth (mm): 60
Drill diameter (mm): 17.0
Drilling depth (mm): 76 or more

【Specification2】
Boxed

【Material/Finish】
Steel
Hot-dip galvanizing
Surface treatment: Hot-dip galvanizing (main body), SV (silver big) treatment (core rod)

【Set contents/accessories】
Nut/washer specifications
Nut/washer

【caution】
Maximum tensile load is the value when concrete strength Fc=21N/[[MM2]].
Be sure to remove chips from the pilot hole.
Set the nut and washer on the anchor, insert it into the hole, and drive it in with a hammer.
Drive the core vertically and firmly until it touches the top of the main body.
For safe and reliable construction, we recommend using a special hand holder.