Clamp Meter DLC470 SANWA

【Features】
Both leakage current and load current can be measured.
Equipped with a backlight, it is easy to see the measured values ​​even in dark places.
Leak clamp meter equipped with a switchable bandpass filter for 50Hz/60Hz frequency band.

【Use】
Equipment earth leakage investigation

【Specification】
Leakage current (mA): 600
Alternating current (A): 400
DC voltage (V): 600
AC voltage (V): 600
Resistance (Ω): 999.9
Detection method: Average value rectification (MEAN)
Calibration documents: Available
Power supply (V): LR03 (AAA alkaline) x 2
Width (mm): 83
Depth (mm): 38
Height (mm): 206
IEC61010 CAT.3-600V Compatible safety design
Equipped with a bandpass filter that extracts only the frequency band centered on 50Hz/60Hz of ACA and ACmA
mA measurement function with 0.01mA resolution
MAX/MIN hold, data hold function
Equipped with backlight
Auto power Off function (about 30 minutes)

【Specification2】
External connection: None
MAX/MIN hold function
Battery life: Approximately 42 hours when Bluetooth function is OFF (backlight off), approximately 40 hours when Bluetooth function is ON (backlight off)
Auto power off
Data Hold function
Safety standard IEC61010-1 CAT.III 600 V

【Material/Finish】
－

【Set contents/accessories】
Test lead TL-21a
Carrying pouch C-DCM660
Instruction manual

【caution】
This instrument is a leak clamp meter for low voltage circuits and must be used in electrical circuits with a ground voltage of 600 Vrms or less.
Be careful not to touch voltages of AC30Vrms (42.4 Vpeak) or DC60V or higher as they are dangerous to the human body.
Powerful Do not use the instrument near anything that generates electromagnetic waves or that is electrically charged. Do not switch to other functions during measurement. Do not use the instrument or your hands when it is wet.