LEAKAGE CLAMP METER DLC470BT SANWA

【Features】
Data transfer via Bluetooth communication is possible
Noise cut by band pass filter function that extracts only frequency bands centered on 50Hz/60Hz of ACA and ACmA
Both leakage current and load current can be measured
Equipped with backlight to measure even in dark areas Easy to see values ​​
MAX hold/MIN hold function
Data hold function/auto power off function
Safety standard: IEC61010-1 CAT3.600V compatible
Count: 600

【Use】
For measuring current and leakage current (alternating current) in electrical circuits, electrical equipment, etc.
For electrical work.
Electrical management
Maintenance

【Specification】
Leakage current (mA): 600
Alternating current (A): 400
DC voltage (V): 600
AC voltage (V): 600
Resistance (Ω): 999.9
Detection method: Average value rectification (MEAN)
Calibration documents: Available
Power supply (V): LR03 (AAA alkaline batteries) x 2
Width (mm): 83
Depth (mm): 38
Height (mm): 206
Power supply: LR03 (AAA (alkaline battery) x 2
Buzzer sound when approx. 30Ω or less Open circuit voltage: approx. 0.9V

【Specification2】
External connection: Bluetooth
Battery life: 40 hours when Bluetooth function is ON
MAX/MIN hold function
Data hold function
Auto power off
Clamp opening diameter (mm): 35
Maximum conductor diameter (mm): 40
Safety Standard IEC 61010-1 CAT.III 600V

【Material/Finish】
－

【Set contents/accessories】
Instruction manual
Test lead (TL-21a)
Carrying case (C-DCM660)

【caution】
This device is a leak clamp meter for low voltage circuits.
Use in electrical circuits with a ground voltage of 600Vrms or less.
Do not input signals exceeding the maximum rated input value.
Do not use near anything that generates strong electromagnetic waves or is electrically charged.
During measurement, do not hold the test lead beyond the collar of the test pin or beyond the barrier of the clamp sensor.